ZM PrintWorks
AxisGlide Pro 3D Printer Maintenance Kit – PTFE Oil Pen + 2 Cleaning Ropes
AxisGlide Pro 3D Printer Maintenance Kit – PTFE Oil Pen + 2 Cleaning Ropes
- Cleans and oils in minutes
- Steel rods, linear rails and lead screws
- Made by a 50-printer farm in Wattala
Couldn't load pickup availability
Dust and old grease build up on your printer's steel rods, linear rails and lead screws, adding drag, noise and wear. AxisGlide Pro lets you strip that grime off and lay down a thin, even film of PTFE synthetic oil in minutes, with no drips and no mess.
In the kit
- 1 × PTFE synthetic oil pen (3 ml), brush tip
- 2 × axis cleaning ropes
- Step-by-step instructions printed on the pack
Not for carbon-fibre rods or plastic bushings, such as the X/Y carbon rods on Bambu Lab P1 and X1 series printers.
What it works on
What it works on
- Steel smooth rods
- Linear rails
- Lead screws (Z-axis)
- Also useful on CNC and laser engraver rails, sewing machines, hinges and drawer slides
Not for carbon-fibre rods or plastic bushings, such as the X/Y carbon rods on Bambu Lab P1 and X1 series printers. Clean those only. Always check your printer maker's maintenance guide first.
How to use
How to use
Switch the printer off first.
- Strip: wrap a cleaning rope around the rod, rail or screw. Pull back and forth to lift dust and old grease.
- Prime: twist the pen base slowly until oil wets the brush. The base twists one way only, so don't force it back.
- Glide: brush a thin, even coat onto the clean metal. Move the axis through its full travel, then wipe off any excess.
Safety and storage
Safety and storage
Keep out of reach of children. Avoid contact with eyes. Do not swallow.
Store the pen upright with the cap on, away from heat and direct sun.
For shops and resellers
For shops and resellers
Wholesale pricing is available for 3D printing shops, makerspaces and tech stores. Message us on WhatsApp to become an authorised retailer. Stockists are listed on our website.
