Zephyr's Market PVT LTD
PolyDryer™
PolyDryer™
Couldn't load pickup availability
PolyDryer™ is designed and co-developed by FabNotion
When drying meets storage. A new standard in filament care!
All in one solution With one drying dock you can add as many PolyDryer Boxes as you need so your next project is always ready to go.
You'll never have to break the seal again Don’t worry about moisture ruining your prints, the PolyDryer Box has the best sealing performance on the market
PolyDryer™ Mods and Add-ons:
(Modifications may affect the safety and performance of the PolyDryer™)
Printables, MakerWorld
Share
What temperature does the PolyDryer achieve?
What temperature does the PolyDryer achieve?
The 360° drying system creates a temperature distribution inside the PolyDryer™. For that reason, a single temperature can't represent the true situation as it varies around the spool. Other elements like the room temperature, initial moisture content, spool size, and material type and weight also affect the internal temperature of the box. The highest range though is 68-73°C.
Can this hold larger than 1KG spools?
Can this hold larger than 1KG spools?
No it cannot - but we are working on a larger solution!
What color should my desiccants be?
What color should my desiccants be?
The desiccants will be orange when dry and dark green when wet. If you ordered from the first batch of PolyDryers these colors will be different.
What would be a good humidity range to see on my hygrometer?
What would be a good humidity range to see on my hygrometer?
The final state after drying is related to the drying setting, initial moisture content of the material, external environment, etc. The following data are based on an internal experiment by Polymaker and are for reference only.
In an environment of 20°C and 60% RH, using the recommended power level and twice the drying time, PLA, PETG, and PC materials placed in an open environment for 2 weeks were dried.
With power level 1, the final relative humidity was between 20-30%.
With power level 2, it was between 15-25%,
And with power level 3, it was between 10-20%.
The minimum readout on the hygrometer is 10% - it will not display lower than that.
